Mother Nature Co2 Generator Co2 for Plants 400ppm – 800ppm 5L 10L Refill

CO2 Generators are packed ‘dry’, allowing you to easily store them without fear of degradation or any nuisance odours. This means the Generator must be activated before use. Activation is a very simple task.
When you’re ready to use the Generator simply open the Generator lid and add hot (not boiling) water at one of the following amounts (according to the size of your CO2 Generator):

5L (1.35 gal) CO2 Generator – add 1.25L (0.33 gal) of hot water to the C02 Generator
10L (2.7 gal) CO2 Generator – add 2.5L (0.66 gal) of hot water to the C02 Generator

Allow 24hrs before you use the CO2 Generator. This 24hr period is essential in order for the contents to properly activate. Replace Generator lid after adding water.

The pump that’s attached to the base of the Generator is designed to be plugged into a lighting timer/relay as the unit is ideally activated in synch with your lighting regime. When your lights come on so does your CO2 Generator – in line with your plant’s natural needs. During ‘lights-off’ periods the Generator switches off and active CO2 producing bacteria come to life within it, re-energising the bucket.

Depending on usage, the specially formulated compost and natural bacteria in your Generator will last up to six months. Once the contents of the Generator are depleted you can simply empty the Generator out, clean it down, and drop in a MotherNature CO2 Refill It’s always handy to have a CO2 Detector to give you an exact idea of CO2 output levels and when a Refill is due.